Derivative
Part of a series of articles about  
Calculus  





Specialized 

The derivative of a function of a real variable measures the sensitivity to change of the function value (output value) with respect to a change in its argument (input value). Derivatives are a fundamental tool of calculus. For example, the derivative of the position of a moving object with respect to time is the object's velocity: this measures how quickly the position of the object changes when time advances.
The derivative of a function of a single variable at a chosen input value, when it exists, is the slope of the tangent line to the graph of the function at that point. The tangent line is the best linear approximation of the function near that input value. For this reason, the derivative is often described as the "instantaneous rate of change", the ratio of the instantaneous change in the dependent variable to that of the independent variable.
Derivatives may be generalized to functions of several real variables. In this generalization, the derivative is reinterpreted as a linear transformation whose graph is (after an appropriate translation) the best linear approximation to the graph of the original function. The Jacobian matrix is the matrix that represents this linear transformation with respect to the basis given by the choice of independent and dependent variables. It can be calculated in terms of the partial derivatives with respect to the independent variables. For a realvalued function of several variables, the Jacobian matrix reduces to the gradient vector.
The process of finding a derivative is called differentiation. The reverse process is called antidifferentiation. The fundamental theorem of calculus relates antidifferentiation with integration. Differentiation and integration constitute the two fundamental operations in singlevariable calculus.^{[Note 1]}
Contents
Differentiation[edit]
Differentiation is the action of computing a derivative. The derivative of a function y = f(x) of a variable x is a measure of the rate at which the value y of the function changes with respect to the change of the variable x. It is called the derivative of f with respect to x. If x and y are real numbers, and if the graph of f is plotted against x, the derivative is the slope of this graph at each point.
The simplest case, apart from the trivial case of a constant function, is when y is a linear function of x, meaning that the graph of y is a line. In this case, y = f(x) = mx + b, for real numbers m and b, and the slope m is given by
where the symbol Δ (Delta) is an abbreviation for "change in", and the combinations and refer to corresponding changes, i.e.: . The above formula holds because
Thus
This gives the value for the slope of a line.
If the function f is not linear (i.e. its graph is not a straight line), then the change in y divided by the change in x varies over the considered range: differentiation is a method to find a unique value for this rate of change, not across a certain range but at any given value of x.
The idea, illustrated by Figures 1 to 3, is to compute the rate of change as the limit value of the ratio of the differences Δy / Δx as Δx becomes infinitely small.
Notation[edit]
Two distinct notations are commonly used for the derivative, one deriving from Leibniz and the other from Joseph Louis Lagrange.
In Leibniz's notation, an infinitesimal change in x is denoted by dx, and the derivative of y with respect to x is written
suggesting the ratio of two infinitesimal quantities. (The above expression is read as "the derivative of y with respect to x", "dy by dx", or "dy over dx". The oral form "dy dx" is often used conversationally, although it may lead to confusion.)
In Lagrange's notation, the derivative with respect to x of a function f(x) is denoted f'(x) (read as "f prime of x") or f_{x}′(x) (read as "f prime x of x"), in case of ambiguity of the variable implied by the differentiation. Lagrange's notation is sometimes incorrectly attributed to Newton.
Rigorous definition[edit]
The most common approach to turn this intuitive idea into a precise definition is to define the derivative as a limit of difference quotients of real numbers.^{[1]} This is the approach described below.
Let f be a real valued function defined in an open neighborhood of a real number a. In classical geometry, the tangent line to the graph of the function f at a was the unique line through the point (a, f(a)) that did not meet the graph of f transversally, meaning that the line did not pass straight through the graph. The derivative of y with respect to x at a is, geometrically, the slope of the tangent line to the graph of f at (a, f(a)). The slope of the tangent line is very close to the slope of the line through (a, f(a)) and a nearby point on the graph, for example (a + h, f(a + h)). These lines are called secant lines. A value of h close to zero gives a good approximation to the slope of the tangent line, and smaller values (in absolute value) of h will, in general, give better approximations. The slope m of the secant line is the difference between the y values of these points divided by the difference between the x values, that is,
This expression is Newton's difference quotient. Passing from an approximation to an exact answer is done using a limit. Geometrically, the limit of the secant lines is the tangent line. Therefore, the limit of the difference quotient as h approaches zero, if it exists, should represent the slope of the tangent line to (a, f(a)). This limit is defined to be the derivative of the function f at a:
When the limit exists, f is said to be differentiable at a. Here f′(a) is one of several common notations for the derivative (see below). From this definition it is obvious that a differentiable function f is increasing if and only if its derivative is positive, and is decreasing iff its derivative is negative. This fact is used extensively when analyzing function behavior, e.g. when finding local extrema.
Equivalently, the derivative satisfies the property that
which has the intuitive interpretation (see Figure 1) that the tangent line to f at a gives the best linear approximation
to f near a (i.e., for small h). This interpretation is the easiest to generalize to other settings (see below).
Substituting 0 for h in the difference quotient causes division by zero, so the slope of the tangent line cannot be found directly using this method. Instead, define Q(h) to be the difference quotient as a function of h:
Q(h) is the slope of the secant line between (a, f(a)) and (a + h, f(a + h)). If f is a continuous function, meaning that its graph is an unbroken curve with no gaps, then Q is a continuous function away from h = 0. If the limit lim_{h→0}Q(h) exists, meaning that there is a way of choosing a value for Q(0) that makes Q a continuous function, then the function f is differentiable at a, and its derivative at a equals Q(0).
In practice, the existence of a continuous extension of the difference quotient Q(h) to h = 0 is shown by modifying the numerator to cancel h in the denominator. Such manipulations can make the limit value of Q for small h clear even though Q is still not defined at h = 0. This process can be long and tedious for complicated functions, and many shortcuts are commonly used to simplify the process.
Definition over the hyperreals[edit]
Relative to a hyperreal extension R ⊂ ^{∗}R of the real numbers, the derivative of a real function y = f(x) at a real point x can be defined as the shadow of the quotient ∆y/∆x for infinitesimal ∆x, where ∆y = f(x + ∆x) − f(x). Here the natural extension of f to the hyperreals is still denoted f. Here the derivative is said to exist if the shadow is independent of the infinitesimal chosen.
Example[edit]
The squaring function given by f(x) = x^{2} is differentiable at x = 3, and its derivative there is 6. This result is established by calculating the limit as h approaches zero of the difference quotient of f(3):
The last expression shows that the difference quotient equals 6 + h when h ≠ 0 and is undefined when h = 0, because of the definition of the difference quotient. However, the definition of the limit says the difference quotient does not need to be defined when h = 0. The limit is the result of letting h go to zero, meaning it is the value that 6 + h tends to as h becomes very small:
Hence the slope of the graph of the squaring function at the point (3, 9) is 6, and so its derivative at x = 3 is f′(3) = 6.
More generally, a similar computation shows that the derivative of the squaring function at x = a is f′(a) = 2a:
Continuity and differentiability[edit]
If f is differentiable at a, then f must also be continuous at a. As an example, choose a point a and let f be the step function that returns the value 1 for all x less than a, and returns a different value 10 for all x greater than or equal to a. f cannot have a derivative at a. If h is negative, then a + h is on the low part of the step, so the secant line from a to a + h is very steep, and as h tends to zero the slope tends to infinity. If h is positive, then a + h is on the high part of the step, so the secant line from a to a + h has slope zero. Consequently, the secant lines do not approach any single slope, so the limit of the difference quotient does not exist.^{[Note 2]}
However, even if a function is continuous at a point, it may not be differentiable there. For example, the absolute value function given by f(x) = x is continuous at x = 0, but it is not differentiable there. If h is positive, then the slope of the secant line from 0 to h is one, whereas if h is negative, then the slope of the secant line from 0 to h is negative one. This can be seen graphically as a "kink" or a "cusp" in the graph at x = 0. Even a function with a smooth graph is not differentiable at a point where its tangent is vertical: For instance, the function given by f(x) = x^{1/3} is not differentiable at x = 0.
In summary, a function that has a derivative is continuous, but there are continuous functions that do not have a derivative.
Most functions that occur in practice have derivatives at all points or at almost every point. Early in the history of calculus, many mathematicians assumed that a continuous function was differentiable at most points. Under mild conditions, for example if the function is a monotone function or a Lipschitz function, this is true. However, in 1872 Weierstrass found the first example of a function that is continuous everywhere but differentiable nowhere. This example is now known as the Weierstrass function. In 1931, Stefan Banach proved that the set of functions that have a derivative at some point is a meager set in the space of all continuous functions.^{[2]} Informally, this means that hardly do any random continuous functions have a derivative at even one point.
The derivative as a function[edit]
Let f be a function that has a derivative at every point in its domain. We can then define a function that maps every point to the value of the derivative of at . This function is written f′ and is called the derivative function or the derivative of f.
Sometimes f has a derivative at most, but not all, points of its domain. The function whose value at a equals f′(a) whenever f′(a) is defined and elsewhere is undefined is also called the derivative of f. It is still a function, but its domain is strictly smaller than the domain of f.
Using this idea, differentiation becomes a function of functions: The derivative is an operator whose domain is the set of all functions that have derivatives at every point of their domain and whose range is a set of functions. If we denote this operator by D, then D(f) is the function f′. Since D(f) is a function, it can be evaluated at a point a. By the definition of the derivative function, D(f)(a) = f′(a).
For comparison, consider the doubling function given by f(x) = 2x; f is a realvalued function of a real number, meaning that it takes numbers as inputs and has numbers as outputs:
The operator D, however, is not defined on individual numbers. It is only defined on functions:
Because the output of D is a function, the output of D can be evaluated at a point. For instance, when D is applied to the squaring function, x ↦ x^{2}, D outputs the doubling function x ↦ 2x, which we named f(x). This output function can then be evaluated to get f(1) = 2, f(2) = 4, and so on.
Higher derivatives[edit]
Let f be a differentiable function, and let f ′ be its derivative. The derivative of f ′ (if it has one) is written f ′′ and is called the second derivative of f. Similarly, the derivative of the second derivative, if it exists, is written f ′′′ and is called the third derivative of f. Continuing this process, one can define, if it exists, the nth derivative as the derivative of the (n1)th derivative. These repeated derivatives are called higherorder derivatives. The nth derivative is also called the derivative of order n.
If x(t) represents the position of an object at time t, then the higherorder derivatives of x have specific interpretations in physics. The first derivative of x is the object's velocity. The second derivative of x is the acceleration. The third derivative of x is the jerk. And finally, the fourth derivative of x is the jounce.
A function f need not have a derivative (for example, if it is not continuous). Similarly, even if f does have a derivative, it may not have a second derivative. For example, let
Calculation shows that f is a differentiable function whose derivative at is given by
f'(x) is twice the absolute value function at , and it does not have a derivative at zero. Similar examples show that a function can have a kth derivative for each nonnegative integer k but not a (k + 1)th derivative. A function that has k successive derivatives is called k times differentiable. If in addition the kth derivative is continuous, then the function is said to be of differentiability class C^{k}. (This is a stronger condition than having k derivatives, as shown by the second example of Smoothness § Examples.) A function that has infinitely many derivatives is called infinitely differentiable or smooth.
On the real line, every polynomial function is infinitely differentiable. By standard differentiation rules, if a polynomial of degree n is differentiated n times, then it becomes a constant function. All of its subsequent derivatives are identically zero. In particular, they exist, so polynomials are smooth functions.
The derivatives of a function f at a point x provide polynomial approximations to that function near x. For example, if f is twice differentiable, then
in the sense that
If f is infinitely differentiable, then this is the beginning of the Taylor series for f evaluated at x + h around x.
Inflection point[edit]
A point where the second derivative of a function changes sign is called an inflection point.^{[3]} At an inflection point, the second derivative may be zero, as in the case of the inflection point x = 0 of the function given by , or it may fail to exist, as in the case of the inflection point x = 0 of the function given by . At an inflection point, a function switches from being a convex function to being a concave function or vice versa.
Notation (details)[edit]
Leibniz's notation[edit]
The symbols , , and were introduced by Gottfried Wilhelm Leibniz in 1675.^{[4]} It is still commonly used when the equation y = f(x) is viewed as a functional relationship between dependent and independent variables. Then the first derivative is denoted by
and was once thought of as an infinitesimal quotient. Higher derivatives are expressed using the notation
for the nth derivative of . These are abbreviations for multiple applications of the derivative operator. For example,
With Leibniz's notation, we can write the derivative of at the point in two different ways:
Leibniz's notation allows one to specify the variable for differentiation (in the denominator), which is relevant in partial differentiation. It also makes the chain rule easier to remember:^{[Note 3]}
Lagrange's notation[edit]
Sometimes referred to as prime notation,^{[5]} one of the most common modern notation for differentiation is due to JosephLouis Lagrange and uses the prime mark, so that the derivative of a function is denoted . Similarly, the second and third derivatives are denoted
 and
To denote the number of derivatives beyond this point, some authors use Roman numerals in superscript, whereas others place the number in parentheses:
 or
The latter notation generalizes to yield the notation for the nth derivative of – this notation is most useful when we wish to talk about the derivative as being a function itself, as in this case the Leibniz notation can become cumbersome.
Newton's notation[edit]
Newton's notation for differentiation, also called the dot notation, places a dot over the function name to represent a time derivative. If , then
 and
denote, respectively, the first and second derivatives of . This notation is used exclusively for derivatives with respect to time or arc length. It is typically used in differential equations in physics and differential geometry.^{[6]}^{[7]} The dot notation, however, becomes unmanageable for highorder derivatives (order 4 or more) and cannot deal with multiple independent variables.
Euler's notation[edit]
Euler's notation uses a differential operator , which is applied to a function to give the first derivative . The nth derivative is denoted .
If y = f(x) is a dependent variable, then often the subscript x is attached to the D to clarify the independent variable x. Euler's notation is then written
 or ,
although this subscript is often omitted when the variable x is understood, for instance when this is the only independent variable present in the expression.
Euler's notation is useful for stating and solving linear differential equations.
Rules of computation[edit]
The derivative of a function can, in principle, be computed from the definition by considering the difference quotient, and computing its limit. In practice, once the derivatives of a few simple functions are known, the derivatives of other functions are more easily computed using rules for obtaining derivatives of more complicated functions from simpler ones.
Rules for basic functions[edit]
Most derivative computations eventually require taking the derivative of some common functions. The following incomplete list gives some of the most frequently used functions of a single real variable and their derivatives.
where r is any real number, then
wherever this is defined. For example, if , then
and the derivative function is defined only for positive x, not for x = 0. When r = 0, this rule implies that f′(x) is zero for x ≠ 0, which is almost the constant rule (stated below).
 Exponential and logarithmic functions:
Rules for combined functions[edit]
In many cases, complicated limit calculations by direct application of Newton's difference quotient can be avoided using differentiation rules. Some of the most basic rules are the following.
 Constant rule: if f(x) is constant, then
 for all functions f and g and all real numbers and .
 for all functions f and g. As a special case, this rule includes the fact whenever is a constant, because by the constant rule.
 for all functions f and g at all inputs where g ≠ 0.
 Chain rule for composite functions: If , then
Computation example[edit]
The derivative of the function given by
is
Here the second term was computed using the chain rule and third using the product rule. The known derivatives of the elementary functions x^{2}, x^{4}, sin(x), ln(x) and exp(x) = e^{x}, as well as the constant 7, were also used.
In higher dimensions[edit]
Vectorvalued functions[edit]
A vectorvalued function y of a real variable sends real numbers to vectors in some vector space R^{n}. A vectorvalued function can be split up into its coordinate functions y_{1}(t), y_{2}(t), ..., y_{n}(t), meaning that y(t) = (y_{1}(t), ..., y_{n}(t)). This includes, for example, parametric curves in R^{2} or R^{3}. The coordinate functions are real valued functions, so the above definition of derivative applies to them. The derivative of y(t) is defined to be the vector, called the tangent vector, whose coordinates are the derivatives of the coordinate functions. That is,
Equivalently,
if the limit exists. The subtraction in the numerator is the subtraction of vectors, not scalars. If the derivative of y exists for every value of t, then y′ is another vectorvalued function.
If e_{1}, ..., e_{n} is the standard basis for R^{n}, then y(t) can also be written as y_{1}(t)e_{1} + … + y_{n}(t)e_{n}. If we assume that the derivative of a vectorvalued function retains the linearity property, then the derivative of y(t) must be
because each of the basis vectors is a constant.
This generalization is useful, for example, if y(t) is the position vector of a particle at time t; then the derivative y′(t) is the velocity vector of the particle at time t.
Partial derivatives[edit]
Suppose that f is a function that depends on more than one variable—for instance,
f can be reinterpreted as a family of functions of one variable indexed by the other variables:
In other words, every value of x chooses a function, denoted f_{x}, which is a function of one real number.^{[Note 4]} That is,
Once a value of x is chosen, say a, then f(x, y) determines a function f_{a} that sends y to a^{2} + ay + y^{2}:
In this expression, a is a constant, not a variable, so f_{a} is a function of only one real variable. Consequently, the definition of the derivative for a function of one variable applies:
The above procedure can be performed for any choice of a. Assembling the derivatives together into a function gives a function that describes the variation of f in the y direction:
This is the partial derivative of f with respect to y. Here ∂ is a rounded d called the partial derivative symbol. To distinguish it from the letter d, ∂ is sometimes pronounced "der", "del", or "partial" instead of "dee".
In general, the partial derivative of a function f(x_{1}, …, x_{n}) in the direction x_{i} at the point (a_{1}, ..., a_{n}) is defined to be:
In the above difference quotient, all the variables except x_{i} are held fixed. That choice of fixed values determines a function of one variable
and, by definition,
In other words, the different choices of a index a family of onevariable functions just as in the example above. This expression also shows that the computation of partial derivatives reduces to the computation of onevariable derivatives.
An important example of a function of several variables is the case of a scalarvalued function f(x_{1}, ..., x_{n}) on a domain in Euclidean space R^{n} (e.g., on R^{2} or R^{3}). In this case f has a partial derivative ∂f/∂x_{j} with respect to each variable x_{j}. At the point (a_{1}, ..., a_{n}), these partial derivatives define the vector
This vector is called the gradient of f at a. If f is differentiable at every point in some domain, then the gradient is a vectorvalued function ∇f that takes the point (a_{1}, ..., a_{n}) to the vector ∇f(a_{1}, ..., a_{n}). Consequently, the gradient determines a vector field.
Directional derivatives[edit]
If f is a realvalued function on R^{n}, then the partial derivatives of f measure its variation in the direction of the coordinate axes. For example, if f is a function of x and y, then its partial derivatives measure the variation in f in the x direction and the y direction. They do not, however, directly measure the variation of f in any other direction, such as along the diagonal line y = x. These are measured using directional derivatives. Choose a vector
The directional derivative of f in the direction of v at the point x is the limit
In some cases it may be easier to compute or estimate the directional derivative after changing the length of the vector. Often this is done to turn the problem into the computation of a directional derivative in the direction of a unit vector. To see how this works, suppose that v = λu. Substitute h = k/λ into the difference quotient. The difference quotient becomes:
This is λ times the difference quotient for the directional derivative of f with respect to u. Furthermore, taking the limit as h tends to zero is the same as taking the limit as k tends to zero because h and k are multiples of each other. Therefore, D_{v}(f) = λD_{u}(f). Because of this rescaling property, directional derivatives are frequently considered only for unit vectors.
If all the partial derivatives of f exist and are continuous at x, then they determine the directional derivative of f in the direction v by the formula:
This is a consequence of the definition of the total derivative. It follows that the directional derivative is linear in v, meaning that D_{v + w}(f) = D_{v}(f) + D_{w}(f).
The same definition also works when f is a function with values in R^{m}. The above definition is applied to each component of the vectors. In this case, the directional derivative is a vector in R^{m}.
Total derivative, total differential and Jacobian matrix[edit]
When f is a function from an open subset of R^{n} to R^{m}, then the directional derivative of f in a chosen direction is the best linear approximation to f at that point and in that direction. But when n > 1, no single directional derivative can give a complete picture of the behavior of f. The total derivative gives a complete picture by considering all directions at once. That is, for any vector v starting at a, the linear approximation formula holds:
Just like the singlevariable derivative, f ′(a) is chosen so that the error in this approximation is as small as possible.
If n and m are both one, then the derivative f ′(a) is a number and the expression f ′(a)v is the product of two numbers. But in higher dimensions, it is impossible for f ′(a) to be a number. If it were a number, then f ′(a)v would be a vector in R^{n} while the other terms would be vectors in R^{m}, and therefore the formula would not make sense. For the linear approximation formula to make sense, f ′(a) must be a function that sends vectors in R^{n} to vectors in R^{m}, and f ′(a)v must denote this function evaluated at v.
To determine what kind of function it is, notice that the linear approximation formula can be rewritten as
Notice that if we choose another vector w, then this approximate equation determines another approximate equation by substituting w for v. It determines a third approximate equation by substituting both w for v and a + v for a. By subtracting these two new equations, we get
If we assume that v is small and that the derivative varies continuously in a, then f ′(a + v) is approximately equal to f ′(a), and therefore the righthand side is approximately zero. The lefthand side can be rewritten in a different way using the linear approximation formula with v + w substituted for v. The linear approximation formula implies:
This suggests that f ′(a) is a linear transformation from the vector space R^{n} to the vector space R^{m}. In fact, it is possible to make this a precise derivation by measuring the error in the approximations. Assume that the error in these linear approximation formula is bounded by a constant times v, where the constant is independent of v but depends continuously on a. Then, after adding an appropriate error term, all of the above approximate equalities can be rephrased as inequalities. In particular, f ′(a) is a linear transformation up to a small error term. In the limit as v and w tend to zero, it must therefore be a linear transformation. Since we define the total derivative by taking a limit as v goes to zero, f ′(a) must be a linear transformation.
In one variable, the fact that the derivative is the best linear approximation is expressed by the fact that it is the limit of difference quotients. However, the usual difference quotient does not make sense in higher dimensions because it is not usually possible to divide vectors. In particular, the numerator and denominator of the difference quotient are not even in the same vector space: The numerator lies in the codomain R^{m} while the denominator lies in the domain R^{n}. Furthermore, the derivative is a linear transformation, a different type of object from both the numerator and denominator. To make precise the idea that f ′(a) is the best linear approximation, it is necessary to adapt a different formula for the onevariable derivative in which these problems disappear. If f : R → R, then the usual definition of the derivative may be manipulated to show that the derivative of f at a is the unique number f ′(a) such that
This is equivalent to
because the limit of a function tends to zero if and only if the limit of the absolute value of the function tends to zero. This last formula can be adapted to the manyvariable situation by replacing the absolute values with norms.
The definition of the total derivative of f at a, therefore, is that it is the unique linear transformation f ′(a) : R^{n} → R^{m} such that
Here h is a vector in R^{n}, so the norm in the denominator is the standard length on R^{n}. However, f′(a)h is a vector in R^{m}, and the norm in the numerator is the standard length on R^{m}. If v is a vector starting at a, then f ′(a)v is called the pushforward of v by f and is sometimes written f_{∗}v.
If the total derivative exists at a, then all the partial derivatives and directional derivatives of f exist at a, and for all v, f ′(a)v is the directional derivative of f in the direction v. If we write f using coordinate functions, so that f = (f_{1}, f_{2}, ..., f_{m}), then the total derivative can be expressed using the partial derivatives as a matrix. This matrix is called the Jacobian matrix of f at a:
The existence of the total derivative f′(a) is strictly stronger than the existence of all the partial derivatives, but if the partial derivatives exist and are continuous, then the total derivative exists, is given by the Jacobian, and depends continuously on a.
The definition of the total derivative subsumes the definition of the derivative in one variable. That is, if f is a realvalued function of a real variable, then the total derivative exists if and only if the usual derivative exists. The Jacobian matrix reduces to a 1×1 matrix whose only entry is the derivative f′(x). This 1×1 matrix satisfies the property that f(a + h) − (f(a) + f ′(a)h) is approximately zero, in other words that
Up to changing variables, this is the statement that the function is the best linear approximation to f at a.
The total derivative of a function does not give another function in the same way as the onevariable case. This is because the total derivative of a multivariable function has to record much more information than the derivative of a singlevariable function. Instead, the total derivative gives a function from the tangent bundle of the source to the tangent bundle of the target.
The natural analog of second, third, and higherorder total derivatives is not a linear transformation, is not a function on the tangent bundle, and is not built by repeatedly taking the total derivative. The analog of a higherorder derivative, called a jet, cannot be a linear transformation because higherorder derivatives reflect subtle geometric information, such as concavity, which cannot be described in terms of linear data such as vectors. It cannot be a function on the tangent bundle because the tangent bundle only has room for the base space and the directional derivatives. Because jets capture higherorder information, they take as arguments additional coordinates representing higherorder changes in direction. The space determined by these additional coordinates is called the jet bundle. The relation between the total derivative and the partial derivatives of a function is paralleled in the relation between the kth order jet of a function and its partial derivatives of order less than or equal to k.
By repeatedly taking the total derivative, one obtains higher versions of the Fréchet derivative, specialized to R^{p}. The kth order total derivative may be interpreted as a map
which takes a point x in R^{n} and assigns to it an element of the space of klinear maps from R^{n} to R^{m} – the "best" (in a certain precise sense) klinear approximation to f at that point. By precomposing it with the diagonal map Δ, x → (x, x), a generalized Taylor series may be begun as
where f(a) is identified with a constant function, x_{i} − a_{i} are the components of the vector x − a, and (Df)_{i} and (D^{2}f)_{jk} are the components of Df and D^{2}f as linear transformations.
Generalizations[edit]
The concept of a derivative can be extended to many other settings. The common thread is that the derivative of a function at a point serves as a linear approximation of the function at that point.
 An important generalization of the derivative concerns complex functions of complex variables, such as functions from (a domain in) the complex numbers C to C. The notion of the derivative of such a function is obtained by replacing real variables with complex variables in the definition. If C is identified with R^{2} by writing a complex number z as x + iy, then a differentiable function from C to C is certainly differentiable as a function from R^{2} to R^{2} (in the sense that its partial derivatives all exist), but the converse is not true in general: the complex derivative only exists if the real derivative is complex linear and this imposes relations between the partial derivatives called the Cauchy–Riemann equations – see holomorphic functions.
 Another generalization concerns functions between differentiable or smooth manifolds. Intuitively speaking such a manifold M is a space that can be approximated near each point x by a vector space called its tangent space: the prototypical example is a smooth surface in R^{3}. The derivative (or differential) of a (differentiable) map f: M → N between manifolds, at a point x in M, is then a linear map from the tangent space of M at x to the tangent space of N at f(x). The derivative function becomes a map between the tangent bundles of M and N. This definition is fundamental in differential geometry and has many uses – see pushforward (differential) and pullback (differential geometry).
 Differentiation can also be defined for maps between infinite dimensional vector spaces such as Banach spaces and Fréchet spaces. There is a generalization both of the directional derivative, called the Gateaux derivative, and of the differential, called the Fréchet derivative.
 One deficiency of the classical derivative is that very many functions are not differentiable. Nevertheless, there is a way of extending the notion of the derivative so that all continuous functions and many other functions can be differentiated using a concept known as the weak derivative. The idea is to embed the continuous functions in a larger space called the space of distributions and only require that a function is differentiable "on average".
 The properties of the derivative have inspired the introduction and study of many similar objects in algebra and topology — see, for example, differential algebra.
 The discrete equivalent of differentiation is finite differences. The study of differential calculus is unified with the calculus of finite differences in time scale calculus.
 Also see arithmetic derivative.
History[edit]
Calculus, known in its early history as infinitesimal calculus, is a mathematical discipline focused on limits, functions, derivatives, integrals, and infinite series. Isaac Newton and Gottfried Leibniz independently discovered calculus in the mid17th century. However, each inventor claimed the other stole his work in a bitter dispute that continued until the end of their lives.
See also[edit]
 Applications of derivatives
 Automatic differentiation
 Differentiability class
 Differentiation rules
 Differintegral
 Fractal derivative
 Generalizations of the derivative
 Hasse derivative
 History of calculus
 Integral
 Infinitesimal
 Linearization
 Mathematical analysis
 Multiplicative inverse
 NonNewtonian calculus
 Numerical differentiation
 Rate (mathematics)
 Radon–Nikodym theorem
 Symmetric derivative
 Schwarzian derivative
Notes[edit]
 ^ Differential calculus, as discussed in this article, is a very well established mathematical discipline for which there are many sources. See Apostol 1967, Apostol 1969, and Spivak 1994.
 ^ Despite this, it is still possible to take the derivative in the sense of distributions. The result is nine times the Dirac measure centered at a.^{[citation needed]}
 ^ In the formulation of calculus in terms of limits, the du symbol has been assigned various meanings by various authors. Some authors do not assign a meaning to du by itself, but only as part of the symbol du/dx. Others define dx as an independent variable, and define du by du = dx⋅f′(x). In nonstandard analysis du is defined as an infinitesimal. It is also interpreted as the exterior derivative of a function u. See differential (infinitesimal) for further information.
 ^ This can also be expressed as the operation known as currying.
References[edit]
 ^ Spivak 1994, chapter 10.
 ^ Banach, S. (1931), "Uber die Baire'sche Kategorie gewisser Funktionenmengen", Studia. Math. (3): 174–179.. Cited by Hewitt, E; Stromberg, K (1963), Real and abstract analysis, SpringerVerlag, Theorem 17.8
 ^ Apostol 1967, §4.18
 ^ Manuscript of November 11, 1675 (Cajori vol. 2, page 204)
 ^ "The Notation of Differentiation". MIT. 1998. Retrieved 24 October 2012.
 ^ Evans, Lawrence (1999). Partial Differential Equations. American Mathematical Society. p. 63. ISBN 0821807722.
 ^ Kreyszig, Erwin (1991). Differential Geometry. New York: Dover. p. 1. ISBN 0486667219.
Bibliography[edit]
Print[edit]
 Anton, Howard; Bivens, Irl; Davis, Stephen (February 2, 2005), Calculus: Early Transcendentals Single and Multivariable (8th ed.), New York: Wiley, ISBN 9780471472445
 Apostol, Tom M. (June 1967), Calculus, Vol. 1: OneVariable Calculus with an Introduction to Linear Algebra, 1 (2nd ed.), Wiley, ISBN 9780471000051
 Apostol, Tom M. (June 1969), Calculus, Vol. 2: MultiVariable Calculus and Linear Algebra with Applications, 1 (2nd ed.), Wiley, ISBN 9780471000075
 Courant, Richard; John, Fritz (December 22, 1998), Introduction to Calculus and Analysis, Vol. 1, SpringerVerlag, ISBN 9783540650584
 Eves, Howard (January 2, 1990), An Introduction to the History of Mathematics (6th ed.), Brooks Cole, ISBN 9780030295584
 Larson, Ron; Hostetler, Robert P.; Edwards, Bruce H. (February 28, 2006), Calculus: Early Transcendental Functions (4th ed.), Houghton Mifflin Company, ISBN 9780618606245
 Spivak, Michael (September 1994), Calculus (3rd ed.), Publish or Perish, ISBN 9780914098898
 Stewart, James (December 24, 2002), Calculus (5th ed.), Brooks Cole, ISBN 9780534393397
 Thompson, Silvanus P. (September 8, 1998), Calculus Made Easy (Revised, Updated, Expanded ed.), New York: St. Martin's Press, ISBN 9780312185480
Online books[edit]
Library resources about Derivative 
 Crowell, Benjamin (2017), Fundamentals of Calculus
 (Govt. of TN), TamilNadu Textbook Corporation (2006), Mathematics vol.2 (PDF)
 Garrett, Paul (2004), Notes on FirstYear Calculus, University of Minnesota
 Hussain, Faraz (2006), Understanding Calculus
 Keisler, H. Jerome (2000), Elementary Calculus: An Approach Using Infinitesimals
 Mauch, Sean (2004), Unabridged Version of Sean's Applied Math Book, archived from the original on 20060415
 Sloughter, Dan (2000), Difference Equations to Differential Equations
 Strang, Gilbert (1991), Calculus
 Stroyan, Keith D. (1997), A Brief Introduction to Infinitesimal Calculus
 Wikibooks, Calculus
External links[edit]
 Hazewinkel, Michiel, ed. (2001) [1994], "Derivative", Encyclopedia of Mathematics, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 9781556080104
 Khan Academy: "Newton, Leibniz, and Usain Bolt"
 Weisstein, Eric W. "Derivative". MathWorld.
 Online Derivative Calculator from Wolfram Alpha.