# Dodecahedron

Common dodecahedra
Ih, order 120
Regular- Small stellated- Great- Great stellated-
Th, order 24 T, order 12 Oh, order 48 Johnson (J84)
Pyritohedron Tetartoid Rhombic- Triangular-
D4h, order 16 D3h, order 12
Rhombo-hexagonal- Rhombo-square- Trapezo-rhombic- Rhombo-triangular-

In geometry, a dodecahedron (Greek δωδεκάεδρον, from δώδεκα dōdeka "twelve" + ἕδρα hédra "base", "seat" or "face") is any polyhedron with twelve flat faces. The most familiar dodecahedron is the regular dodecahedron, which is a Platonic solid. There are also three regular star dodecahedra, which are constructed as stellations of the convex form. All of these have icosahedral symmetry, order 120.

The pyritohedron, a common crystal form in pyrite, is an irregular pentagonal dodecahedron, having the same topology as the regular one but pyritohedral symmetry while the tetartoid has tetrahedral symmetry. The rhombic dodecahedron, seen as a limiting case of the pyritohedron, has octahedral symmetry. The elongated dodecahedron and trapezo-rhombic dodecahedron variations, along with the rhombic dodecahedra, are space-filling. There are a large number of other dodecahedra.

## Regular dodecahedra

The convex regular dodecahedron is one of the five regular Platonic solids and can be represented by its Schläfli symbol {5, 3}.

The dual polyhedron is the regular icosahedron {3, 5}, having five equilateral triangles around each vertex.

 Convex regular dodecahedron Small stellated dodecahedron Great dodecahedron Great stellated dodecahedron

The convex regular dodecahedron also has three stellations, all of which are regular star dodecahedra. They form three of the four Kepler–Poinsot polyhedra. They are the small stellated dodecahedron {5/2, 5}, the great dodecahedron {5, 5/2}, and the great stellated dodecahedron {5/2, 3}. The small stellated dodecahedron and great dodecahedron are dual to each other; the great stellated dodecahedron is dual to the great icosahedron {3, 5/2}. All of these regular star dodecahedra have regular pentagonal or pentagrammic faces. The convex regular dodecahedron and great stellated dodecahedron are different realisations of the same abstract regular polyhedron; the small stellated dodecahedron and great dodecahedron are different realisations of another abstract regular polyhedron.

## Other pentagonal dodecahedra

In crystallography, two important dodecahedra can occur as crystal forms in some symmetry classes of the cubic crystal system that are topologically equivalent to the regular dodecahedron but less symmetrical: the pyritohedron with pyritohedral symmetry, and the tetartoid with tetrahedral symmetry:

### Pyritohedron

Pyritohedron

A pyritohedron has 30 edges: 6 corresponding to cube faces, and 24 touching cube vertices.
Face polygon irregular pentagon
Coxeter diagrams
Faces 12
Edges 30 (6 + 24)
Vertices 20 (8 + 12)
Symmetry group Th, [4,3+], (3*2), order 24
Rotation group T, [3,3]+, (332), order 12
Dual polyhedron Pseudoicosahedron
Properties face transitive
Net

A pyritohedron is a dodecahedron with pyritohedral (Th) symmetry. Like the regular dodecahedron, it has twelve identical pentagonal faces, with three meeting in each of the 20 vertices (see figure).[1] However, the pentagons are not constrained to be regular, and the underlying atomic arrangement has no true fivefold symmetry axes. Its 30 edges are divided into two sets – containing 24 and 6 edges of the same length. The only axes of rotational symmetry are three mutually perpendicular twofold axes and four threefold axes.

Although regular dodecahedra do not exist in crystals, the pyritohedron form occurs in the crystals of the mineral pyrite, and it may be an inspiration for the discovery of the regular Platonic solid form. The true regular dodecahedron can occur as a shape for quasicrystals (such as holmium–magnesium–zinc quasicrystal) with icosahedral symmetry, which includes true fivefold rotation axes.

 .mw-parser-output .tmulti .thumbinner{display:flex;flex-direction:column}.mw-parser-output .tmulti .trow{display:flex;flex-direction:row;clear:left;flex-wrap:wrap;width:100%;box-sizing:border-box}.mw-parser-output .tmulti .tsingle{margin:1px;float:left}.mw-parser-output .tmulti .theader{clear:both;font-weight:bold;text-align:center;align-self:center;background-color:transparent;width:100%}.mw-parser-output .tmulti .thumbcaption{text-align:left;background-color:transparent}.mw-parser-output .tmulti .text-align-left{text-align:left}.mw-parser-output .tmulti .text-align-right{text-align:right}.mw-parser-output .tmulti .text-align-center{text-align:center}@media all and (max-width:720px){.mw-parser-output .tmulti .thumbinner{width:100%!important;box-sizing:border-box;max-width:none!important;align-items:center}.mw-parser-output .tmulti .trow{justify-content:center}.mw-parser-output .tmulti .tsingle{float:none!important;max-width:100%!important;box-sizing:border-box;text-align:center}.mw-parser-output .tmulti .thumbcaption{text-align:center}}Orthogonal projections ― The wedge height of this pyritohedron is 1/4 of the cube edge length. Same example pyritohedron and regular dodecahedron.

#### Crystal pyrite

Its name comes from one of the two common crystal habits shown by pyrite, the other one being the cube.

 Cubic pyrite Pyritohedral pyrite

#### Cartesian coordinates

The coordinates of the eight vertices of the original cube are:

(±1, ±1, ±1)

The coordinates of the 12 vertices of the cross-edges are:

(0, ±(1 + h), ±(1 − h2))
(±(1 + h), ±(1 − h2), 0)
(±(1 − h2), 0, ±(1 + h))

where h is the height of the wedge-shaped "roof" above the faces of the cube. When h = 1, the six cross-edges degenerate to points and a rhombic dodecahedron is formed. When h = 0, the cross-edges are absorbed in the facets of the cube, and the pyritohedron reduces to a cube. When h = −1 + 5/2, the multiplicative inverse of the golden ratio, the result is a regular dodecahedron. When h = −1 − 5/2, the conjugate of this value, the result is a regular great stellated dodecahedron.

A reflected pyritohedron is made by swapping the nonzero coordinates above. The two pyritohedra can be superimposed to give the compound of two dodecahedra. The image to the left shows the case where the pyritohedra are convex regular dodecahedra.

#### Geometric freedom

The pyritohedron has a geometric degree of freedom with limiting cases of a cubic convex hull at one limit of colinear edges, and a rhombic dodecahedron as the other limit as 6 edges are degenerated to length zero. The regular dodecahedron represents a special intermediate case where all edges and angles are equal.

Special cases of the pyritohedron
1 : 1 1 : 1 2 : 1 1.3092... : 1 1 : 1 0 : 1
h = −5 + 1/2 h = 0 h = 5 − 1/2 h = 1

Regular star, great stellated dodecahedron, with pentagons distorted into regular pentagrams

Concave pyritohedral dodecahedron is called a endo-dodecahedron and can tessellate space with the convex regular dodecahedron.

A cube can be divided into a pyritohedron by bisecting all the edges, and faces in alternate directions.

The geometric proportions of the pyritohedron in the Weaire–Phelan structure

A regular dodecahedron is an intermediate case with equal edge lengths.

A rhombic dodecahedron is the limiting case with the 6 crossedges reducing to length zero.

### Tetartoid

Tetartoid
Tetragonal pentagonal dodecahedron
Face polygon irregular pentagon
Conway notation gT
Faces 12
Edges 30 (6+12+12)
Vertices 20 (4+4+12)
Symmetry group T, [3,3]+, (332), order 12
Properties convex, face transitive
Tetartoid

A tetartoid (also tetragonal pentagonal dodecahedron, pentagon-tritetrahedron, and tetrahedric pentagon dodecahedron) is a dodecahedron with chiral tetrahedral symmetry (T). Like the regular dodecahedron, it has twelve identical pentagonal faces, with three meeting in each of the 20 vertices. However, the pentagons are not regular and the figure has no fivefold symmetry axes.

Although regular dodecahedra do not exist in crystals, the tetartoid form does. The name tetartoid comes from the Greek root for one-fourth because it has one fourth of full octahedral symmetry, and half of pyritohedral symmetry.[2] The mineral cobaltite can have this symmetry form.[3]

Its topology can be as a cube with square faces bisected into 2 rectangles like the pyritohedron, and then the bisection lines are slanted retaining 3-fold rotation at the 8 corners.

#### Cartesian coordinates

The following points are vertices of a tetartoid pentagon under tetrahedral symmetry:

(a, b, c); (−a, −b, c); (−n/d1, −n/d1, n/d1); (−c, −a, b); (−n/d2, n/d2, n/d2),

under the following conditions:[4]

0 ≤ abc,
n = a2cbc2,
d1 = a2ab + b2 + ac − 2bc,
d2 = a2 + ab + b2ac − 2bc,
nd1d2 ≠ 0.

#### Variations

It can be seen as a tetrahedron, with edges divided into 3 segments, along with a center point of each triangular face. In Conway polyhedron notation it can be seen as gT, a gyro tetrahedron.

### Dual of triangular gyrobianticupola

A lower symmetry form of the regular dodecahedron can be constructed as the dual of a polyhedra constructed from two triangular anticupola connected base-to-base, called a triangular gyrobianticupola. It has D3d symmetry, order 12. It has 2 sets of 3 identical pentagons on the top and bottom, connected 6 pentagons around the sides which alternate upwards and downwards. This form has a hexagonal cross-section and identical copies can be connected as a partial hexagonal honeycomb, but all vertices will not match.

## Rhombic dodecahedron

Rhombic dodecahedron

The rhombic dodecahedron is a zonohedron with twelve rhombic faces and octahedral symmetry. It is dual to the quasiregular cuboctahedron (an Archimedean solid) and occurs in nature as a crystal form. The rhombic dodecahedron packs together to fill space.

The rhombic dodecahedron can be seen as a degenerate pyritohedron where the 6 special edges have been reduced to zero length, reducing the pentagons into rhombic faces.

The rhombic dodecahedron has several stellations, the first of which is also a parallelohedral spacefiller.

Another important rhombic dodecahedron, the Bilinski dodecahedron, has twelve faces congruent to those of the rhombic triacontahedron, i.e. the diagonals are in the ratio of the golden ratio. It is also a zonohedron and was described by Bilinski in 1960.[5] This figure is another spacefiller, and can also occur in non-periodic spacefillings along with the rhombic triacontahedron, the rhombic icosahedron and rhombic hexahedra.[6]

## Other dodecahedra

There are 6,384,634 topologically distinct convex dodecahedra, excluding mirror images—the number of vertices ranges from 8 to 20.[7] (Two polyhedra are "topologically distinct" if they have intrinsically different arrangements of faces and vertices, such that it is impossible to distort one into the other simply by changing the lengths of edges or the angles between edges or faces.)

Topologically distinct dodecahedra (excluding pentagonal and rhombic forms)