This article needs additional citations for verification. (October 2007) (Learn how and when to remove this template message)
A kilij (from Turkish kılıç, literally "sword") is a type of one-handed, single-edged and moderately curved saber used by the Uyghur Khaganate, Seljuk Empire, Timurid Empire, Mamluk Empire, Ottoman Empire, and the later Turkic Khanates of Central Asia and Eurasian steppes. These blades evolved from Turko-Mongol sabers that had been used over all the lands invaded or influenced by the Turkic peoples.
The Turkish root verb "kır-" means "to kill" with the suffix "-inç" makes "kır-ınç" (instrument for killing) becomes kılınç, then kılıç.
The Central Asian Turks and their offshoots began using curved cavalry swords beginning from the late Xiongnu period. The earliest examples of curved, single edged Turkish swords can be found associated with the late Xiongnu and Kök Turk empires. These swords were made of pattern welded high carbon crucible steel, generally with long slightly curved blades with one sharp edge. A sharp back edge on the distal third of the blade known as "yalman" or "yelman" was introduced during this period.
In the Early Middle Ages, the Turkic people of Central Asia came into contact with Middle Eastern civilizations through their shared Islamic faith. Turkic Ghilman slave-soldiers serving under the Umayyad and Abbasid Caliphates introduced "kilij" type sabers to all of the other Middle Eastern cultures. Previously, Arabs and Persians used straight-bladed swords such as the earlier types of the Arab saif, takoba and kaskara.
During Islamizaton of the Turks, the kilij became more and more popular in the İslamic armies. When the Seljuk Empire invaded Persia and became the first Turkic Muslim political power in Western Asia, kilij became the dominant sword form. The Iranian (Persian) shamshir was created during the Turkic Seljuk Empire period of Iran/Persia.
After the invasion of Anatolia this sword type was carried by Turkomen tribes to the future seat of the Ottoman Empire. During the Crusades, Turks of Anatolia were the first target to be attacked by the European armies, and their curved swords were misperceived by Europeans as the imaginative "scimitar of the Saracens", the generic sword type for all "Orientals".
Evolution of Ottoman kilij
The Kilij, as a specific type of sabre associated with the Ottoman Turks and the Mamluks of Egypt, was recognisable by the late 15th century. The oldest surviving examples sport a long blade curving slightly from the hilt and more strongly in the distal half. The width of the blade stays narrow (with a slight taper) up until the last 30% of its length, at which point it flares out and becomes wider. This distinctive flaring tip is called a "yalman" (false edge) and it greatly adds to the cutting power of the sword. Ottoman sabres of the next couple of centuries were often of the Selchuk variety, though the native kilij form was also found; Iranian blades (that did not have the yalman) were fitted with Ottoman hilts. These hilts normally had slightly longer quillons to the guard, which was usually of brass or silver, and sported a rounded termination to the grips, usually made of horn, unlike that seen on Iranian swords (Iranian swords usually had iron guards and the grip terminated in a hook-shape often with a metal pommel sheathing). The finest mechanical damascus and wootz steel were often used in making of these swords. In the classical period of the Ottoman Empire, Bursa, Damascus and the Derbent regions became the most famous swordsmithing centers of the empire. Turkish blades became a major export item to Europe and Asia.
In the late 18th century, though shamshirs continued to be used, the kilij underwent an evolution: the blade was shortened, became much more acutely curved, and was wider with an even deeper yalman. In addition to the flared tip, these blades have a distinct "T-shaped" cross section to the back of the blade. This allowed greater blade stiffness without an increase in weight. Because of the shape of the tip of the blade and the nature of its curvature the kilij could be used to perform the thrust, in this it had an advantage over the shamshir whose extreme curvature did not allow the thrust. Some of these shorter kilij are also referred to as pala, but there does not seem to be a clear-cut distinction in nomenclature.
After the Auspicious Incident, the Turkish army was modernized in the European fashion and kilijs were abandoned for western-type cavalry sabers and smallswords. This change, and the introduction of industrialized European steels to Ottoman market, created a great decline in traditional swordsmithing. Civilians in the provinces and county militia (zeibeks in Western Anatolia, bashibozuks in Balkan provinces), continued to carry hand-made kilijs as a part of their traditional dress. İn the late 19th century, Sultan Abdulhamid II's palace guards, the Ertuğrul Brigade (which was composed of nomadic Turkomans of Anatolia), carried traditional kilijs as a romantic-nationalistic revival of the earlier Ottoman Turkoman cavalry raiders. This sentiment continued after dethronement of the sultan by the nationalist Young Turks. High-ranking officer dress saber of early 20th century was a modern composite of traditional kilij, "mameluke" and European cavalry saber.
Adoption by Western armed forces
Sabres were known and used in eastern, and to a lesser extent central Europe from the time of the Magyar invasions, beginning in the 9th century (see the so-called Sabre of Charlemagne). Following the Ottoman invasion of Balkans, however, European armies were introduced to the kilij itself. The kilij first became popular with the Balkan nations and the Hungarian hussar cavalry after 15th century. Around 1670, the karabela (from Turkish word karabela: black bane) was evolved, based on Janissary kilij sabres; it became the most popular sword-form in the Polish army. During 17th and 18th centuries, curved sabers that evolved from Turkish kilij, were widespread throughout Europe.
The Ottomans' historical dominance of the region ensured the use of the sword by other nations, notably the Mamluks in Egypt. During the Napoleonic Wars, the French conquest of Egypt brought these swords to the attention of the Europeans. This type of sabre became very popular for light cavalry officers, in both France and Britain, and became a fashionable sword for senior officers to wear. In 1831 the "Mamaluke", as the sword was now called, became a regulation pattern for British general officers (the 1831 Pattern, still in use today). The American victory over the rebellious forces in the citadel of Tripoli in 1805 during the First Barbary War, led to the presentation of bejewelled examples of these swords to the senior officers of the US Marines. Officers of the US Marine Corps still use a mameluke pattern dress sword. Although some genuine Turkish kilij sabres were used by Westerners, most "mameluke sabres" were manufactured in Europe; their hilts were very similar in form to the Ottoman prototype, however, their blades, even when an expanded yelman was incorporated, tended to be longer, narrower and less curved than those of the true kilij.
The Turkish language has numerous terminology describing swords, swordsmithing, parts and types of blades. Below is listed some of the terminology about names of the main parts of a kilij and scabbard in order of the term, literal translation of the Turkish word, and its equivalent in English terminology of swords.
|Term||Literal translation||Equivalent in English sword terminology – Meaning|
|Taban||Base||Overall metal body of the sword that is composed of tang and blade|
|Kuyruk or Tugru||Tail||Tang|
|Kulp or Boyun||Grip or neck (of the handle)||Grip|
|Kabza başı||Head of the handle||Pommel|
|Perçin or Çij||Rivet||Rivet|
|Ağız or Yalım||Mouth||Edge|
|Yiv, Oluk or Göl||Chamfer, groove or lake||Fuller|
|Namlu boynu||Neck of the blade||Central narrow section of the blade|
|Yalman||Double edged end section of the blade|
|Namlu yüzü||Face of the blade||Flat of the blade|
|Süvre or Uç||Point or tip||Point|
|Balçak oyuğu||Guard cavity||Section of the locket where handguard fits in|
|Taşıma halkası||Carrying ring||Suspension ring|
|Gövde||Body||Main part of the scabbard|
- Dao (sword)
- Mameluke sword: a derivative of the Kilij
- Yatagan: another distinctive Turkish sword
- Dictionary.com Unabridged - kilij entry
- Çoruhlu, Yaşar "Erken Devir Türk Sanatı" p.74-75
- Ögel, Bahaaddin, "Türk Kılıcının Menşei ve Tekamülü Hakkında"
- Khorasani, Manouchehr "Arms and Armour from Iran"
- Stone and LaRocca, pp. 356-357.
- Stone, G. C. and LaRocca, D. J. (1999). A glossary of the construction, decoration and use of arms and armor in all countries and in all times. Courier Dover Publications. ISBN 0-486-40726-8.
- ÖGEL, Bahaeddin, "Türk Kılıcının Menşe ve Tekamülü Hakkında", A.Ü. DTCF Dergisi, 6, 1948
- The Kilij and Shamshir. Turkish and Persian sabers
|Look up kilij in Wiktionary, the free dictionary.|