LMS Fowler Class 3F
This article needs additional citations for verification. (December 2014) (Learn how and when to remove this template message)
|LMS Fowler Class 3F|
47336 at Ancoats, 1955
The London Midland and Scottish Railway (LMS) Fowler 3F 0-6-0T is a class of steam locomotive, often known as Jinty. They represent the ultimate development of the Midland Railway's six-coupled tank engines.
Design of this class was based on rebuilds by Henry Fowler of the Midland Railway 2441 Class introduced in 1899 by Samuel Waite Johnson. These rebuilds featured a Belpaire firebox and improved cab. 422 Jinties were built between 1924 and 1931; this class was just one of the Midland designs used on an ongoing basis by the LMS. The locomotives were built by the ex-L&YR Horwich Works and the private firms Bagnall's, Beardmores, Hunslet, North British and the Vulcan Foundry.
|7100–7119||7260–7279||12||1924||Vulcan Foundry 3717–3736|
|7120–7134||7280–7294||13||1924||North British 23121–23135|
|7150–7156||7310–7316||—||1929||W. G. Bagnall 2358–2364||Né SDJR 19–25|
|16400–16459||7317–7376||34||1926||North British 23396–23455|
|16460–16509||7377–7426||35||1926||Vulcan Foundry 3948–3997|
|16535–16543||7452–7460||37||1926||W. G. Bagnall 2288–2296|
|16544–16549||7461–7466||37||1926||W. G. Bagnall 2297–2302|
|16550–16554||7467–7471||50||1928||Vulcan Foundry 4175–4179|
|16555–16560||7472–7477||50||1927||Vulcan Foundry 4169–4174|
|16561–16599||7478–7516||50||1928||Vulcan Foundry 4180–4218|
|16675–16684||7592–7601||59||1928||W. G. Bagnall 2343–2352|
|16750–16764||7667–7681||82||1931||LMS Horwich Works|
When new, they were numbered 7100–7149, 16400–16764. Numbers 7150–7156 were added when the LMS absorbed the Somerset and Dorset Joint Railway locomotives in 1930. In the 1934 LMS renumbering scheme, the locomotives were assigned the series 7260–7681. On the outbreak of the Second World War in 1939 they were initially chosen as the standard shunting locomotive for the War Department, but later the more modern Hunslet "Austerity" 0-6-0ST was chosen in preference. Nevertheless, eight were dispatched to France before its fall in 1940, and only five returned in 1948. Two, 7456 and 7553, were converted to the 5 ft 3 in (1,600 mm) Irish broad gauge in 1944 and 1945 for use on Northern Counties Committee lines in Northern Ireland, becoming the NCC Class Y, and numbered 18 and 19. A total of 412 thus entered British Railways stock in 1948, rising to 417 by the end of the year.
British Railways numbers were the LMS numbers prefixed with '4'. Numbers 47477, 47478, 47479, 47480, 47481, 47655 and 47681 were fitted for push-pull train working.
The first withdrawals started in 1959 and by 1964 half had been withdrawn. The final five survived until 1967, with a further one, 47445 continuing with the National Coal Board.
start of year
|1940||422||8||7613/11/07/60/59/63, 7589, 7617.||to WD 8 to 15|
|1944||412||2||7456, 7553||to NCC 18/19|
|1948||412||5||47589, 47607/11/59/60.||Repatriated from SNCF|
|47445 to NCB|
|1967||6||6||47289, 47313/83, 47531/34, 47629.|
Due to their large numbers, late withdrawals and renowned performances, nine of these engines (plus a spare set of frames and a boiler from 47564) have been preserved. They are most suited to a further working life and many were restored within years of leaving the scrap heap. Today only 47445 has never steamed in preservation. Their locations and conditions are as follows: Their current number is highlighted in Bold.
One member of the class has operated on the main line in preservation. This was 7298/47298, which took part during the Rainhill celebrations in 1980 when it hauled a number of Steamport residents from the museum in Southport to Rainhill and also took part in the cavalcade. Owned by Ian Riley, in February 2017 it was undergoing it's "ten-yearly overhaul" and was expected to return to operation "in a couple of years".
|Original Number||S&D Number||Number BR||Built||Builder||Withdrawn||Base||Status||Notes|
|7119||47279||Aug 1924||Vulcan Foundry||Dec 1966||Keighley and Worth Valley Railway||Static Display||On display inside the museum at Oxenhope.|
|7138||47298||Oct 1924||Hunslet Engine Company||Dec 1966||East Lancashire Railway||Undergoing Overhaul|
|16407||47324||Jun 1926||North British Locomotive Company||Dec 1966||East Lancashire Railway||Undergoing Overhaul|
|16410||23||47327||Jul 1926||North British Locomotive Company||Dec 1966||Midland Railway||Under Overhaul||Currently painted in S&DJR Prussian Blue, This engine has also appeared in the film Train of Events where it is used as a yard shunter in London.|
|16440||47357||Jul 1926||North British Locomotive Company||Dec 1966||Midland Railway||Under Overhaul|
|16466||47383||Oct 1926||Vulcan Foundry||Oct 1967||Severn Valley Railway||Static Display||Last to be withdrawn. On Display inside The Engine House at Highley awaiting eventual overhaul.|
|16489||47406||Dec 1926||Vulcan Foundry||Dec 1966||Great Central Railway||Operational|
|16528||47445||May 1927||Hunslet Engine Company||Apr 1966||Midland Railway||Under Restoration||Sold to NCB after withdrawal.|
|16576||47493||Feb 1928||Vulcan Foundry||Dec 1966||Spa Valley Railway||Under Overhaul|
This section does not cite any sources. (July 2012) (Learn how and when to remove this template message)
An engine of this type can be seen in the Rev. W. Awdry's The Railway Series book 'The Eight Famous Engines'. The character's name was Jinty, and came from the "Other Railway" (aka British Railways) to help out when the main engines went on a journey to England.
In the videogame Transport Tycoon of Chris Sawyer, the Jinty is offered as the cheapest and most basic engine of the game.
An OO gauge model of the Class 3F was first produced by Tri-ang in 1952 and production continued after the company became Hornby Railways in the 1970s. Hornby released a retooled version in 1978 with better detailing and continue to produce that model for their "Railroad" range.
In the 2000s Bachmann Branchline released a more detailed OO model. In N gauge Graham Farish produced a model as a "GP Tank" in various liveries including some of other railway companies before later tooling an accurate 'Jinty' model. In O gauge and Gauge 1 Bachmann Brassworks produce an example. In O gauge, Connoisseur Models produces an etched brass kit. In HO (3.5 mm) scale Firedrake Productions produced a small run of 20 kits.
- Rowledge, J.W.P. (1975). Engines of the LMS, built 1923–51. Oxford: Oxford Publishing Company. ISBN 0-902888-59-5.
- Hunt, David; Jennison, John; Essery, Bob. LMS Locomotive Profiles No. 14 The Standard Class 3 Freight Tank Engines. ISBN 978-1-905184-80-4.
|Wikimedia Commons has media related to LMS Fowler 3F (Jinty).|
- LMS Jinty at Spa Valley Railway - 28 April 2004 - Photo gallery