Partial derivative
Part of a series of articles about  
Calculus  





Specialized 

In mathematics, a partial derivative of a function of several variables is its derivative with respect to one of those variables, with the others held constant (as opposed to the total derivative, in which all variables are allowed to vary). Partial derivatives are used in vector calculus and differential geometry.
The partial derivative of a function with respect to the variable is variously denoted by
Sometimes, for the partial derivative of with respect to is denoted as Since a partial derivative generally has the same arguments as the original function, its functional dependence is sometimes explicitly signified by the notation, such as in:
The symbol used to denote partial derivatives is ∂. One of the first known uses of this symbol in mathematics is by Marquis de Condorcet from 1770, who used it for partial differences. The modern partial derivative notation was created by AdrienMarie Legendre (1786), though he later abandoned it; Carl Gustav Jacob Jacobi reintroduced the symbol again in 1841.^{[1]}
Contents
Introduction[edit]
Suppose that f is a function of more than one variable. For instance,
The graph of this function defines a surface in Euclidean space. To every point on this surface, there are an infinite number of tangent lines. Partial differentiation is the act of choosing one of these lines and finding its slope. Usually, the lines of most interest are those that are parallel to the plane, and those that are parallel to the yzplane (which result from holding either y or x constant, respectively).
To find the slope of the line tangent to the function at and parallel to the plane, we treat as a constant. The graph and this plane are shown on the right. Below, we see how the function looks on the plane . By finding the derivative of the equation while assuming that is a constant, we find that the slope of at the point is:
So at , by substitution, the slope is 3. Therefore,
at the point . That is, the partial derivative of with respect to at is 3, as shown in the graph.
Definition[edit]
Basic definition[edit]
The function f can be reinterpreted as a family of functions of one variable indexed by the other variables:
In other words, every value of y defines a function, denoted f_{y} , which is a function of one variable x.^{[a]} That is,
Note that in this section the subscript notation f_{y} denotes a function contingent on a fixed value of y, and not a partial derivative.
Once a value of y is chosen, say a, then f(x,y) determines a function f_{a} which traces a curve x^{2} + ax + a^{2} on the plane:
In this expression, a is a constant, not a variable, so f_{a} is a function of only one real variable, that being x. Consequently, the definition of the derivative for a function of one variable applies:
The above procedure can be performed for any choice of a. Assembling the derivatives together into a function gives a function which describes the variation of f in the x direction:
This is the partial derivative of f with respect to x. Here ∂ is a rounded d called the partial derivative symbol. To distinguish it from the letter d, ∂ is sometimes pronounced "tho" or "partial".
In general, the partial derivative of an nary function f(x_{1}, ..., x_{n}) in the direction x_{i} at the point (a_{1}, ..., a_{n}) is defined to be:
In the above difference quotient, all the variables except x_{i} are held fixed. That choice of fixed values determines a function of one variable
and by definition,
In other words, the different choices of a index a family of onevariable functions just as in the example above. This expression also shows that the computation of partial derivatives reduces to the computation of onevariable derivatives.
An important example of a function of several variables is the case of a scalarvalued function f(x_{1}, ..., x_{n}) on a domain in Euclidean space (e.g., on or ). In this case f has a partial derivative ∂f/∂x_{j} with respect to each variable x_{j}. At the point a, these partial derivatives define the vector
This vector is called the gradient of f at a. If f is differentiable at every point in some domain, then the gradient is a vectorvalued function ∇f which takes the point a to the vector ∇f(a). Consequently, the gradient produces a vector field.
A common abuse of notation is to define the del operator (∇) as follows in threedimensional Euclidean space with unit vectors :
Or, more generally, for ndimensional Euclidean space with coordinates and unit vectors :
Formal definition[edit]
Like ordinary derivatives, the partial derivative is defined as a limit. Let U be an open subset of and a function. The partial derivative of f at the point with respect to the ith variable x_{i} is defined as
Even if all partial derivatives ∂f/∂x_{i}(a) exist at a given point a, the function need not be continuous there. However, if all partial derivatives exist in a neighborhood of a and are continuous there, then f is totally differentiable in that neighborhood and the total derivative is continuous. In this case, it is said that f is a C^{1} function. This can be used to generalize for vector valued functions, by carefully using a componentwise argument.
The partial derivative can be seen as another function defined on U and can again be partially differentiated. If all mixed second order partial derivatives are continuous at a point (or on a set), f is termed a C^{2} function at that point (or on that set); in this case, the partial derivatives can be exchanged by Clairaut's theorem:
Examples[edit]
Geometry[edit]
The volume V of a cone depends on the cone's height h and its radius r according to the formula
The partial derivative of V with respect to r is
which represents the rate with which a cone's volume changes if its radius is varied and its height is kept constant. The partial derivative with respect to equals which represents the rate with which the volume changes if its height is varied and its radius is kept constant.
By contrast, the total derivative of V with respect to r and h are respectively
and
The difference between the total and partial derivative is the elimination of indirect dependencies between variables in partial derivatives.
If (for some arbitrary reason) the cone's proportions have to stay the same, and the height and radius are in a fixed ratio k,
This gives the total derivative with respect to r:
which simplifies to:
Similarly, the total derivative with respect to h is:
The total derivative with respect to both r and h of the volume intended as scalar function of these two variables is given by the gradient vector
 .
Optimization[edit]
Partial derivatives appear in any calculusbased optimization problem with more than one choice variable. For example, in economics a firm may wish to maximize profit π(x, y) with respect to the choice of the quantities x and y of two different types of output. The first order conditions for this optimization are π_{x} = 0 = π_{y}. Since both partial derivatives π_{x} and π_{y} will generally themselves be functions of both arguments x and y, these two first order conditions form a system of two equations in two unknowns.
Thermodynamics and mathematical physics[edit]
Partial derivatives appear in thermodynamic equations like GibbsDuhem equation as well in other equations from mathematical physics. Here the variables being held constant in partial derivatives can be ratio of simple variables like mole fractions x_{i} in the following example involving the Gibbs energies in a ternary mixture system:
Express mole fractions of a component as functions of other components mole fraction and binary mole ratios:
Differential quotients can be formed at constant ratios like those above:
Ratios X, Y, Z of mole fractions can be written for ternary and multicomponent systems:
which can be used for solving partial differential equations like:
This equality can be rearranged to have differential quotient of mole fractions on one side.
Image resizing[edit]
Partial derivatives are key to targetaware image resizing algorithms. Widely known as seam carving, these algorithms require each pixel in an image to be assigned a numerical 'energy' to describe their dissimilarity against orthogonal adjacent pixels. The algorithm then progressively removes rows or columns with the lowest energy. The formula established to determine a pixel's energy (magnitude of gradient at a pixel) depends heavily on the constructs of partial derivatives.
Economics[edit]
Partial derivatives play a prominent role in economics, in which most functions describing economic behaviour posit that the behaviour depends on more than one variable. For example, a societal consumption function may describe the amount spent on consumer goods as depending on both income and wealth; the marginal propensity to consume is then the partial derivative of the consumption function with respect to income.
Notation[edit]
For the following examples, let be a function in and .
Firstorder partial derivatives:
Secondorder partial derivatives:
Secondorder mixed derivatives:
Higherorder partial and mixed derivatives:
When dealing with functions of multiple variables, some of these variables may be related to each other, thus it may be necessary to specify explicitly which variables are being held constant to avoid ambiguity. In fields such as statistical mechanics, the partial derivative of with respect to , holding and constant, is often expressed as
Conventionally, for clarity and simplicity of notation, the partial derivative function and the value of the function at a specific point are conflated by including the function arguments when the partial derivative symbol (Leibniz notation) is used. Thus, an expression like
is used for the function, while
might be used for the value of the function at the point . However, this convention breaks down when we want to evaluate the partial derivative at a point like . In such a case, evaluation of the function must be expressed in an unwieldy manner as
or
in order to use the Leibniz notation. Thus, in these cases, it may be preferable to use the Euler differential operator notation with as the partial derivative symbol with respect to the ith variable. For instance, one would write for the example described above, while the expression represents the partial derivative function with respect to the 1st variable.^{[2]}
For higher order partial derivatives, the partial derivative (function) of with respect to the jth variable is denoted . That is, , so that the variables are listed in the order in which the derivatives are taken, and thus, in reverse order of how the composition of operators is usually notated. Of course, Clairaut's theorem implies that as long as comparatively mild regularity conditions on f are satisfied.
Antiderivative analogue[edit]
There is a concept for partial derivatives that is analogous to antiderivatives for regular derivatives. Given a partial derivative, it allows for the partial recovery of the original function.
Consider the example of
The "partial" integral can be taken with respect to x (treating y as constant, in a similar manner to partial differentiation):
Here, the "constant" of integration is no longer a constant, but instead a function of all the variables of the original function except x. The reason for this is that all the other variables are treated as constant when taking the partial derivative, so any function which does not involve will disappear when taking the partial derivative, and we have to account for this when we take the antiderivative. The most general way to represent this is to have the "constant" represent an unknown function of all the other variables.
Thus the set of functions , where g is any oneargument function, represents the entire set of functions in variables x,y that could have produced the xpartial derivative .
If all the partial derivatives of a function are known (for example, with the gradient), then the antiderivatives can be matched via the above process to reconstruct the original function up to a constant. Unlike in the singlevariable case, however, not every set of functions can be the set of all (first) partial derivatives of a single function. In other words, not every vector field is conservative.
Higher order partial derivatives[edit]
Second and higher order partial derivatives are defined analogously to the higher order derivatives of univariate functions. For the function the "own" second partial derivative with respect to x is simply the partial derivative of the partial derivative (both with respect to x):^{[3]}^{:316–318}
The cross partial derivative with respect to x and y is obtained by taking the partial derivative of f with respect to x, and then taking the partial derivative of the result with respect to y, to obtain
Schwarz's theorem states that if the second derivatives are continuous the expression for the cross partial derivative is unaffected by which variable the partial derivative is taken with respect to first and which is taken second. That is,
or equivalently
Own and cross partial derivatives appear in the Hessian matrix which is used in the second order conditions in optimization problems.
See also[edit]
Notes[edit]
 ^ This can also be expressed as the adjointness between the product space and function space constructions.
References[edit]
 ^ Miller, Jeff (20090614). "Earliest Uses of Symbols of Calculus". Earliest Uses of Various Mathematical Symbols. Retrieved 20090220.
 ^ Spivak, M. (1965). Calculus on Manifolds. New York: W. A. Benjamin, Inc. p. 44. ISBN 9780805390216.
 ^ Chiang, Alpha C. Fundamental Methods of Mathematical Economics, McGrawHill, third edition, 1984.
External links[edit]
 Hazewinkel, Michiel, ed. (2001) [1994], "Partial derivative", Encyclopedia of Mathematics, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 9781556080104
 Partial Derivatives at MathWorld