# Rational function

This article includes a list of references, but its sources remain unclear because it has insufficient inline citations. (September 2015) (Learn how and when to remove this template message) |

In mathematics, a **rational function** is any function which can be defined by a **rational fraction**, *i.e.* an algebraic fraction such that both the numerator and the denominator are polynomials. The coefficients of the polynomials need not be rational numbers; they may be taken in any field *K*. In this case, one speaks of a rational function and a rational fraction *over K*. The values of the variables may be taken in any field *L* containing *K*. Then the domain of the function is the set of the values of the variables for which the denominator is not zero and the codomain is *L*.

The set of rational functions over a field *K* is a field, the field of fractions of the ring of the polynomial functions over *K*.

## Contents

## Definitions[edit]

A function is called a rational function if and only if it can be written in the form

where and are polynomial functions of and is not the zero function. The domain of is the set of all values of for which the denominator is not zero.

However, if and have a non-constant polynomial greatest common divisor , then setting and produces a rational function

which may have a larger domain than , and is equal to on the domain of It is a common usage to identify and , that is to extend "by continuity" the domain of to that of Indeed, one can define a rational fraction as an equivalence class of fractions of polynomials, where two fractions and are considered equivalent if . In this case is equivalent to .

A **proper rational function** is a rational function in which the degree of is no greater than the degree of and both are real polynomials.^{[1]}

## Examples[edit]

The rational function

is not defined at

It is asymptotic to as

The rational function

is defined for all real numbers, but not for all complex numbers, since if *x* were a square root of (i.e. the imaginary unit or its negative), then formal evaluation would lead to division by zero:

which is undefined.

A constant function such as *f*(*x*) = π is a rational function since constants are polynomials. Note that the function itself is rational, even though the value of *f*(*x*) is irrational for all *x*.

Every polynomial function is a rational function with A function that cannot be written in this form, such as is not a rational function. The adjective "irrational" is not generally used for functions.

The rational function is equal to 1 for all *x* except 0, where there is a removable singularity. The sum, product, or quotient (excepting division by the zero polynomial) of two rational functions is itself a rational function. However, the process of reduction to standard form may inadvertently result in the removal of such singularities unless care is taken. Using the definition of rational functions as equivalence classes gets around this, since *x*/*x* is equivalent to 1/1.

## Taylor series[edit]

The coefficients of a Taylor series of any rational function satisfy a linear recurrence relation, which can be found by equating the rational function to a Taylor series with indeterminate coefficients, and collecting like terms after clearing the denominator.

For example,

Multiplying through by the denominator and distributing,

After adjusting the indices of the sums to get the same powers of *x*, we get

Combining like terms gives

Since this holds true for all *x* in the radius of convergence of the original Taylor series, we can compute as follows. Since the constant term on the left must equal the constant term on the right it follows that

Then, since there are no powers of *x* on the left, all of the coefficients on the right must be zero, from which it follows that

Conversely, any sequence that satisfies a linear recurrence determines a rational function when used as the coefficients of a Taylor series. This is useful in solving such recurrences, since by using partial fraction decomposition we can write any proper rational function as a sum of factors of the form *1 / (ax + b)* and expand these as geometric series, giving an explicit formula for the Taylor coefficients; this is the method of generating functions.

## Abstract algebra and geometric notion[edit]

In abstract algebra the concept of a polynomial is extended to include formal expressions in which the coefficients of the polynomial can be taken from any field. In this setting given a field *F* and some indeterminate *X*, a **rational expression** is any element of the field of fractions of the polynomial ring *F*[*X*]. Any rational expression can be written as the quotient of two polynomials *P*/*Q* with *Q* ≠ 0, although this representation isn't unique. *P*/*Q* is equivalent to *R*/*S*, for polynomials *P*, *Q*, *R*, and *S*, when *PS* = *QR*. However, since *F*[*X*] is a unique factorization domain, there is a unique representation for any rational expression *P*/*Q* with *P* and *Q* polynomials of lowest degree and *Q* chosen to be monic. This is similar to how a fraction of integers can always be written uniquely in lowest terms by canceling out common factors.

The field of rational expressions is denoted *F*(*X*). This field is said to be generated (as a field) over *F* by (a transcendental element) *X*, because *F*(*X*) does not contain any proper subfield containing both *F* and the element *X*.

### Complex rational functions[edit]

In complex analysis, a rational function

is the ratio of two polynomials with complex coefficients, where *Q* is not the zero polynomial and *P* and *Q* have no common factor (this avoids *f* taking the indeterminate value 0/0). The domain and range of *f* are usually taken to be the Riemann sphere, which avoids any need for special treatment at the poles of the function (where *Q*(*z*) is 0).

The *degree* of a rational function is the maximum of the degrees of its constituent polynomials *P* and *Q*. If the degree of *f* is *d*, then the equation

has *d* distinct solutions in *z* except for certain values of *w*, called *critical values*, where two or more solutions coincide. The function *f* can therefore be thought of as a *d*-fold covering of the *w*-sphere by the *z*-sphere.

Rational functions with degree 1 are called *Möbius transformations* and form the automorphisms group of the Riemann sphere. Rational functions are representative examples of meromorphic functions.

### Notion of a rational function on an algebraic variety[edit]

Like polynomials, rational expressions can also be generalized to *n* indeterminates *X*_{1},..., *X*_{n}, by taking the field of fractions of *F*[*X*_{1},..., *X*_{n}], which is denoted by *F*(*X*_{1},..., *X*_{n}).

An extended version of the abstract idea of rational function is used in algebraic geometry. There the function field of an algebraic variety *V* is formed as the field of fractions of the coordinate ring of *V* (more accurately said, of a Zariski-dense affine open set in *V*). Its elements *f* are considered as regular functions in the sense of algebraic geometry on non-empty open sets *U*, and also may be seen as morphisms to the projective line.

## Applications[edit]

These objects are first encountered in school algebra. In more advanced mathematics they play an important role in ring theory, especially in the construction of field extensions. They also provide an example of a *nonarchimedean field* (see Archimedean property).

Rational functions are used in numerical analysis for interpolation and approximation of functions, for example the Padé approximations introduced by Henri Padé. Approximations in terms of rational functions are well suited for computer algebra systems and other numerical software. Like polynomials, they can be evaluated straightforwardly, and at the same time they express more diverse behavior than polynomials.

Rational functions are used to approximate or model more complex equations in science and engineering including fields and forces in physics, spectroscopy in analytical chemistry, enzyme kinetics in biochemistry, electronic circuitry, aerodynamics, medicine concentrations in vivo, wave functions for atoms and molecules, optics and photography to improve image resolution, and acoustics and sound^{[citation needed]}.

In signal processing, the Laplace transform (for continuous systems) or the z-transform (for discrete-time systems) of the impulse response of commonly-used linear time-invariant systems (filters) with infinite impulse response are rational functions over complex numbers.

## See also[edit]

- Field of fractions
- Partial fraction decomposition
- Partial fractions in integration
- Function field of an algebraic variety
- Algebraic fractions – a generalization of rational functions that allows taking integer roots

## References[edit]

**^**Martin J. Corless, Art Frazho,*Linear Systems and Control*, p. 163, CRC Press, 2003 ISBN 0203911377.- Malcolm W. Pownall,
*Functions and Graphs: Calculus Preparatory Mathematics*, p. 203, Prentice-Hall, 1983 ISBN 0133323048.

- Malcolm W. Pownall,

- Hazewinkel, Michiel, ed. (2001) [1994], "Rational function",
*Encyclopedia of Mathematics*, Springer Science+Business Media B.V. / Kluwer Academic Publishers, ISBN 978-1-55608-010-4 - Press, W.H.; Teukolsky, S.A.; Vetterling, W.T.; Flannery, B.P. (2007), "Section 3.4. Rational Function Interpolation and Extrapolation",
*Numerical Recipes: The Art of Scientific Computing*(3rd ed.), New York: Cambridge University Press, ISBN 978-0-521-88068-8