Unlike pneumatic tires which use a separate inner tube, tubeless tires have continuous ribs molded integrally into the bead of the tire so that they are forced by the pressure of the air inside the tire to seal with the flanges of the metal rim of the wheel.
Many patents had been filed covering tubeless tires. Killen Tire applied for a patent in 1928 and was granted GB patent 329955 in the UK in 1930. The Wingfoot Corporation, a subsidiary of Goodyear Tire were granted a patent in South Africa in 1944. Due to technical problems, most of these designs only saw limited production or were abandoned.
Frank Herzegh working for BF Goodrich applied for a patent in 1946 and eventually received US patent 2587470 in 1952 in the United States. By 1955 tubeless tires became standard equipment on new cars. BF Goodrich had to defend their patent in court several times, due to the similarities of previous designs. The primary difference between the BF Goodrich design and their predecessors was the usage of butyl rubber, which was more resistant to air leakage than the natural rubber used in the other designs.
Traditional designs of pneumatic tires required a separate inner tube which could fail for a number of reasons, such as incorrect tire fit, friction between the tire wall and inner tube generating excess heat, or a puncture. Tubeless tire technology does away with the need for an inner tube thereby increasing safety. In a tubeless tire, the tire and the rim of the wheel form an airtight seal, with the valve being directly mounted on the rim. If a tubeless tire gets a small puncture, air escapes only through the hole, leading to a gentle deflation. Conversely, a non-tubeless tire, with an inner tube, could potentially burst like a balloon, leading to deflation of the tire which could result in sudden loss of control of the vehicle. However, the "bursting like a balloon" scenario is highly unlikely due to fact that the inner tube is inside of the tire and will deflate at a rate proportional to the puncture hole size. In antique automobiles, made before the mid 1950's, the rims are not designed for tubeless tires, and an inner tube is required to prevent slow leaks at the bead.
Liquid tire sealant can be injected into tubeless tires to prevent deflation in case of small punctures, although there is controversy regarding its compatibility with direct tire pressure monitoring systems (TPMS) that employ sensors mounted inside the tire. Some manufacturers of sealants assert that their products are indeed compatible, but others warned that, e.g., the "sealant may come in contact with the sensor in a way that renders the sensor TEMPORARILY inoperable until it is properly cleaned, inspected and re-installed by a tire care professional". Such doubts are also reported by others. Use of such sealants may void the TPMS sensor warranty.
|The Wikibook Bicycles/Maintenance and Repair/Wheels and Tires has a page on the topic of: Fitting and Repair for Tubeless Ready Tyre on to Tubeless Ready Rim|
A tubeless bicycle tire system requires a compatible tire, an airtight rim — capable of being sealed at the valve stem, spoke holes (if they go all the way through the rim) and the tire bead seat. The main benefit of tubeless tires is the ability to use low air pressure for better traction without getting pinch flats because there is no tube to pinch between the rim and an obstacle.
UST or Universal System Tubeless is a US patent 6257676 rim designed by Mavic with hooked edges designed to seal with specially designed tires. Several companies such as Michelin and Hutchinson make tires compatible with UST rims. UST was the first tubeless system for bicycles. Other companies such as Stan’s NoTubes, Bontrager, DT Swiss, and WTB have their own similar system called Tubeless Ready.
In 2006, Shimano and Hutchinson introduced a tubeless system for road bicycles. Tubeless tires have not yet gained popular acceptance in road racing due to lack of sponsorship, the tradition of using tubular tires and the fact that, even without the innertube, the combined weight of tubeless rims and tires is more than top-of-the-line tubular tire wheelsets. Road tubeless is gaining popularity among riders for whom the benefits are worth the costs.
- "B.F. Goodrich Co. announces development of tubeless tire". History.com by A&E Television Networks. Retrieved April 4, 2015.
- BF Goodrich Co. v. United States Rubber Co. (D. Md. 1956). Text
- BF Goodrich Co. v. United States Rubber Co., 244 F.2d 468 (4th Cir. 1957).
- Foster, Hailey (Dec 5, 1954). "TUBELESS TIRES; Standard on Most 1955 Automobiles, They Are Safer and Last Longer". New York Times. p. 27.(subscription required)
- "Ride-On TPS Tire Sealants and Tire Pressure Monitoring Systems (TPMS)". Retrieved 15 Oct 2014.
- "Faqs: Is Slime TPMS Safe?". 2012. Retrieved 15 Oct 2014.
- "Convenient tire sealants to fix a flat tire; Evaluations show that compressor kits are better than aerosol sealers". Retrieved 15 Oct 2014.
- "Common TPMS Service Questions and Answers". July 16, 2012. Retrieved 15 Oct 2014.
- Felton, Vernon (2008). "Are Tubeless Tires Worth It?". Bike Magazine. Archived from the original on 2010-08-23. Retrieved 2011-08-31.
- Brown, Sheldon. "Sheldon Brown's Glossary: U. S. T". Sheldon Brown. Retrieved April 4, 2015.
- "Why Tubeless Ready?". Bontrager.com. Retrieved April 4, 2015.
- "Tubeless Explained and Demystified". notubes.com. Retrieved April 4, 2015.
- Phillips, Matt (December 2008). "The Scoop on Tubeless". Bicycling. Rodale: 90.
- Zinn, Lennard. "Lennard Zinn Technical FAQ". Velo News. Retrieved 2011-08-31.
- "road tubeless tires yea or nay". roadbikereview.com. Retrieved 2015-03-02.